PTFE special processing products / Others
Swing Pad
- PTFE special processing products / Others
- Other processed products
overview
This sliding material uses PTFE as the base material. It has extremely excellent self-lubrication and low friction, and is particularly effective under low speed and high load conditions. It can also withstand severe temperature changes, and absorbs the effects of dead and live loads caused by earthquakes and other events with its smooth sliding, preventing the occurrence of dangerous stress.
Applications
・ Industrial Applications: Plant related/pipeline/storage tank/boiler/watergate/etc.
・ Architectural Use: Beam supports/Curtain walls/Expansion bridges/Sliding gates/Others
・ Civil Engineering: Road bridge bearings/Railway bridge bearings/others
・ others: Vehicles (bogie core plate and side plate) / Bearing materials for extrusion method / Ship moving platform / Others
Features
● low friction coefficient: An extremely low coefficient of friction is achieved under low speed and high load conditions.
● Smooth sliding characteristics: There is no phenomenon such as self-fusion or stick-slip, and it smoothly absorbs fluctuations such as expansion and contraction of heavy loads.
● Completely self-lubrication: A completely oil-free sliding material that does not require maintenance such as lubrication.
● Simple design: It is easy to process, and a thin pad is attached to the sliding surface, allowing for a simple and compact design.
● Excellent Weatherability: Even when exposed outdoors, it is hardly affected by weather or climate. It also does not rust or corrode, and its friction coefficient remains stable over a wide range of temperatures.
Sliding material type
| Sliding material type | Schematic diagram of the configuration | Sliding material/Matching material | Design limit surface pressure (※1) (RT) |
|
|---|---|---|---|---|
| GL type | Sliding sheet using PTFE/glass cloth laminate plate |  |
GL sheet 1t Mating material: SUS plate |
45MPa |
 |
GL sheet 1t Counterpart: GL sheet 1t |
|||
| MF type | Sliding sheet made of PTFE with special filler |  |
MF seat 2.4t 3t Mating material: SUS plate |
12MPa |
*In the actual design stage, the maximum load must be kept below the design limit pressure, taking into account safety factors.
Please contact us for details regarding safety factor design.
Characteristics table
| item | Measurement method ASTM | unit | GL type | MF type | |
|---|---|---|---|---|---|
| specific gravity | D-792 | — | 2.24 | 2.29 | |
| Tensile strength | D-638 | Mpa | 147 | 18.1 | |
| Elongation | D-638 | % | 0.05 | 280 | |
| Compressive strength | D-695 | 0.2% offset | Mpa | 45.1 | 12.7 |
| hardness | D-2240 | Durometer D | D60-75 | D64〜67 | |
| Thermal conductivity | Cenco Fitch | W/m･k | 0.46 | 0.33 | |
| Thermal expansion coefficient | D-696 | 10-5 | 1.83 | 6.4 | |
| Water absorption rate | D-570 | % | <0.02 | <0.01 | |
| Weatherability | — | — | excellence | excellence | |
| Acid resistance | — | — | excellence | excellence | |
| Alkali resistance | — | — | excellence | excellence | |
*The above values are measured values and not standard values.
