Tube / Hose
FEP thin heat shrink tube TKF series
- Tube / Hose
- ROHS Directive
overview
Our unique manufacturing technology has enabled us to expand the range of coating possible for thin items compared to conventional products.
Applications
・Electronic components, sensors, resin molding, electric wires
・Coating for optical fiber protection materials etc.
Features
This is a shrink tube with the unique characteristics of fluoroplastic.
-Shrinkage ratio is 2:1.
-Excellent heat resistance, Insulation, chemical resistance, releasing ability, and Weatherability.
please note
*High temperature shrinking using special industrial equipment such as a hot air gun or electric furnace is required.
*Heat shrink processing is also possible depending on the specifications.
*Depending on the material of the mating material, discoloration may occur. When shrinking, please check the heat resistance temperature of the mating material before use.
*Due to its characteristics, the diameter may shrink depending on the temperature of the storage location.
To maintain the inner diameter before shrinking, store in a cool, dark place (below 30°C).
Dimensions
| Distributor | Inner diameter before shrinking (mm) | Inside diameter after shrinking (mm) | Wall thickness after shrinkage (mm) | Elongation rate (free) | Length (mm) |
|---|---|---|---|---|---|
| TKF-310-050 | 1.1 or higher | Less than 0.5 | 0.32±0.03 | 0 or more | 1200・1500・1800 |
| TKF-310-085 | 1.70 or higher | 0.85 or less | 0.28±0.03 | 0 or more |
*The inner diameter after shrinkage is the value when heated at 260℃ for 10 minutes and is not a guaranteed value.
*For sizes other than those listed above, please check the table below for manufacturing range and contact us.
Manufacturing range (actual sizes)
| Inner diameter before shrinking (mm) | Inside diameter after shrinking (mm) | Available length (mm) | Material | |
|---|---|---|---|---|
| minimum | 1.10 | 0.50 | 500～3000 | FEP |
| maximum | 3.40 | 1.70 |
*Please contact us separately for sizes and lengths other than those listed in the table above.
